In this article we’ll discover data modification statements used to modify data in SQL server using the INSERT, UPDATE, DELETE, and MERGE statement.
The SELECT, INSERT, UPDATE, DELETE, and MERGE statement are collectively referred to DML (Data Manipulation Language) statements. These statements allow you to view and modify data. We extensively cover SELECT in other articles. In this article we look at how we can add, modify, and remove data with the INSERT, UPDATE, and DELETE statements. Finally, we’ll wrap up the discussion with MERGE.
All the examples for this lesson are based on Microsoft SQL Server Management Studio and the AdventureWorks2012 database. You can get started using these free tools using my Guide Getting Started Using SQL Server.
Data Modification using the INSERT Statement
The INSERT statement is used to add one or more rows to a database table.
Data can either be inserted one row at a time or in bulk. You can also use insert to add rows from one table into another.
The insert statement can be part of a transaction. Based on the success of the transaction you can either COMMIT or ROLLBACK the changes.
Each time an insert is executed, the @@ROWCOUNT is updated.
The basic structure of the INSERT statement is
INSERT INTO tableName (column1, column2, …) VALUES (value1, value2, …)
As you can see the basic structure for the insert statement is to:
- specify the table we wish to insert rows into
- the columns we wish to populate
- the values to insert.
Let’s look at a specific example. In this simple example we’re going to insert a row into the Department table.
Notice that we’re specifying the table, columns, and values we wish to insert.
BEGIN TRANSACTION
INSERT INTO HumanResources.Department (Name, GroupName)
VALUES ('Risk Management', 'Executive General and Administration')
SELECT Name, GroupName
FROM HumanResources.Department
ROLLBACK
When you run this you see the newly inserted row below
Image may be NSFW.
Clik here to view.
You may be wondering why I have wrapped my example in a transaction. I did this so I don’t permanently save my changes. If I didn’t, I could only run this particular example once!
The transaction starts with BEGIN TRANSACTION and is reversed out with ROLLBACK.
It is a good trick you can use when you want to test out an insert but don’t want it to persist. Of course, all changes should be tested in a development or test environment! Never test within your production environment. If you want to dig deeper, then check out my article Introduction to the Insert Statement.
UPDATE Statement
The UPDATE statement is used to change a column value for one or more database table rows.
Since the update statement can affect one or more rows, you should take great care in making sure your updating the rows you wish!
Like the INSERT statement, update can be part of a transaction. Based on the success of the transaction you can either COMMIT or ROLLBACK the changes.
Once an UPDATE statement completes, @@ROWCOUNT is updated to reflect the number of rows affected.
The basic structure of the UPDATE statement is
UPDATE tableName SET column1=value1, column2=value2,... WHERE filterColumn=filterValue
The UPDATE statement is typically in three parts:
- The tableName to update
- The SET clause which specifies the columns to update
- The WHERE clause, which specifies which rows to include in the update operation.
Let’s look at a specific example. In this simple example we’re going to update a row into the Department table.
Let assume that the director of Human Resources wants to change the Information Services department name to Information Technology.
Here is the UPDATE statement you could use:
BEGIN TRANSACTION UPDATE HumanResources.Department SET Name = 'Information Technology' WHERE DepartmentID = 11 SELECT DepartmentID, Name, GroupName FROM HumanResources.Department ROLLBACK
Note: I wrapped my example in a transaction so that I don’t permanently alter my sample database.
Here you can see the newly update value.
Image may be NSFW.
Clik here to view.
Notice that the UPDATE statement specifically targets the row using the primary key DepartmentID. By doing this I can guarantee I’m updating the correct row.
Care should be taken when writing the UPDATE statement. You really need to be sure the WHERE clause is including only those rows you wish to update. Many people have been burned by incorrectly writing the where clause.
Before I write my UPDATE statement, I usually test out the WHERE clause using a SELECT. If the select returns the correct rows, I can be sure the update’s scope is correct.
DELETE Statement
The DELETE statement is used to remove one or more rows from a database table.
Since the DELETE statement can affect one or more rows, you should take great care in making sure you’re deleting the correct rows!
Like the INSERT statement, the DELETE statement can be part of a transaction. Based on the success of the transaction you can either COMMIT or ROLLBACK the changes.
Once a delete statement completes, @@ROWCOUNT is updated to reflect the number of rows affected.
The basic structure of the DELETE statement is
DELETE tableName WHERE filterColumn=filterValue;
The DELETE statement is typically in two parts:
- The tableName to update
- The WHERE clause, which specifies which rows to include in the update operation.
Let assume that the director of Human Resources wants to remove all pay history changed before 2002.
Here is the DELETE statement you could use:
BEGIN TRANSACTION DELETE HumanResources.EmployeePayHistory WHERE RateChangeDate < '2002-01-01' ROLLBACK
Of course before you run this I would test with a SELECT statement. This is the statement I would run to make sure what I’m intending to delete is correct.
SELECT BusinessEntityID, RateChangeDate FROM HumanResources.EmployeePayHistory WHERE RateChangeDate < '2002-01-01'
When you run this statement, the specified rows are removed from the table.
MERGE Statement
The MERGE statement provides a means to perform, in one statement, an INSERT, UPDATE, or DELETE operation on one table based on source data from another.
The main advantage to using the MERGE statement is that, when it executes it makes one pass through the data, as opposed to a pass for each operation (e.g. three passes for separate INSERT, UPDATE, and DELETE operations).
The basic structure for the MERGE statement is
MERGE targetTable USING sourceTable ON joinCondition WHEN MATCHED --update WHEN NOT MATCHED --insert WHEN NOT MATCHED SOURCE --delete
The basic idea is to perform an INSERT, UPDATE, or DELETE operation on the targetTable, using the sourceTable as input. The targetTable and sourceTable rows are matched to one another according to the join condition.
Depending upon the match, then INSERT, UPDATE, or DELETE statements are executed.
For example, if you looking to update one table with values from another, then “WHEN MATCHED” it would make sense to update the rows, and “WHEN NOT MATCHED SOURCE” delete the row from the target, as it wasn’t found in the source.
Let’s look at an example. Suppose you have a list of updated vendor data. It consists of new and update information. Depending on whether we find a BusinessEntityID in Purchasing.Vendor we’ll either want to INSERT or UPDATE the data.
We’ll use an implicit table for our source, but you can easily imagine that being another table in the database.
BEGIN TRANSACTION MERGE Purchasing.Vendor V USING (Values (1492, 'AUSTRALI0001','Australia Bike LLC', 1,1,1), (100, 'AUSTRALI0002','Australia Cycle', 2,0,1 ) ) AS SOURCE (BusinessEntityID, AccountNumber, Name, CreditRating, PreferredVendorStatus, ActiveFlag) ON V.AccountNumber = Source.AccountNumber WHEN MATCHED THEN UPDATE SET V.Name = Source.Name, V.CreditRating = Source.CreditRating, V.PreferredVendorStatus = Source.PreferredVendorStatus, V.ActiveFlag = Source.ActiveFlag, V.ModifiedDate = GETDATE() WHEN NOT MATCHED THEN INSERT (BusinessEntityID, AccountNumber, Name, CreditRating, PreferredVendorStatus, ActiveFlag, ModifiedDate) VALUES (Source.BusinessEntityID, Source.AccountNumber, Source.Name, Source.CreditRating, Source.PreferredVendorStatus, Source.ActiveFlag, GETDATE()); ROLLBACK
Here are the steps, in general that SQL takes, to process the statement.
For each row in Source.
- Match the source row AccountNumber to Purchasing.Vendor.AccountNumber.
- If there is a MATCH then UPDATE the Vendor with Source column values.
- If there is no MATCH then INSERT a new Vendor using Source column values.
Hopefully you can see that the MERGE statement is very powerful. It can be used to combine several operations, which, if used without the MERGE would require you to write a stored procedure using conditional logic. This in itself isn’t, bad, but it does make it simpler to write code.
Do worry if you don’t complete understand how merge works, we’ll revisit in detail in another article.
Conclusion
This article serves as an introduction to various ways you can use SQL to modify data within your database. We dig deeper into each method in follow-up articles:
- INSERT – Introduction to the INSERT Statement.
- UPDATE – Introduction to the UPDATE Statement.
- DELETE – Introduction to the DELETE Statement.
- MERGE – Introduction to the Merge Statement.
The post Learn how to Add, Remove, or Modify values in a SQL Table appeared first on Essential SQL.